EcoScreen Chemical Product Catalog

Step 1 - Remove ink

EcoWash #1EcoWash #1 E.L.O.
1

Apply EcoWash #1 to both sides of screen to dissolve ink, agitating lightly for best results.

Step 1 - Remove ink illustration 1.1
2

Rinse well with cold water.

Step 1 - Remove ink illustration 2.1

Step 2 - Remove emulsion

EcoStrip #1EcoStrip #2
1

Apply EcoStrip #1 or #2, biodegradable emulsion remover to both sides of a wet screen.

Step 2 - Remove emulsion illustration 1.1
2

Let the product work for 1 to 2 minutes or until emulsion starts breaking down (DO NOT LET PRODUCT DRY ON THE SCREEN).

Step 2 - Remove emulsion illustration 2.1Step 2 - Remove emulsion illustration 2.2
3

Remove with a high pressure cold water system.

Step 2 - Remove emulsion illustration 3.1

Step 3 - Remove light or recent haze

EcoWash #1EcoHaze #1
1

Apply a pre-mixed 50/50 solution of EcoWash and EcoHaze #1 to both sides of the screen mesh using an EcoScreen soft bristle brush.

Step 3 - Remove light or recent haze illustration 1.1
2

Depending on the stain, let the product work on the screen between 2-5 minutes.

Step 3 - Remove light or recent haze illustration 2.1
3

We recommend that you always pre-rinse your screen before you pressure wash with cold water. This will eliminate product residue from splashing on the screen washer and also eliminate the risk of breathing any cleaners.

Step 3 - Remove light or recent haze illustration 3.1
4

Pressure wash your screen with cold water.

Step 3 - Remove light or recent haze illustration 4.1

Step 4 - Remove heavy or older haze

EcoWash #1EcoHaze #1
1

Apply EcoHaze bio-degradable Haze Remover to both sides of the Screen. (Applying on a DRY screen if possible)

Step 4 - Remove heavy or older haze illustration 1.1
2

Let air dry 15 minutes (using a fan improves the results)

Step 4 - Remove heavy or older haze illustration 2.1
3

After 15 minutes apply the EcoWash #1 over the EcoHaze and let the products work for 5 minutes.

Step 4 - Remove heavy or older haze illustration 3.1
4

Pre-rinse with cold water.

Step 4 - Remove heavy or older haze illustration 4.1
5

Remove with a high-pressure water system. Turn screen around and high pressure wash this side. This will remove 5 - 20 % more stains.

Step 4 - Remove heavy or older haze illustration 5.1

Step 5 - Final screen prep

EcoDegreaseEcoWet
1

Apply EcoDegrease or EcoWet, biodegradable products to both sides of the screen

Step 5 - Final screen prep illustration 1.1
2

Lightly rinse product with a low pressure garden hose starting at the top and working your way to the bottom of the screen.

Step 5 - Final screen prep illustration 2.1

On-press cleanup

Press wash use

  • Card excess ink from the screen before applying the wash.
  • Use EcoPressWash products at full strength. Do not dilute.
  • Apply to both sides of the screen with a towel or rag.
  • Wipe dry with a clean towel or rag before returning to press.
EcoPressWash #222EcoPressWash #109

Key handling notes

Important reminders

  • Use cold water for rinsing and pressure washing throughout the reclaim process.
  • Do not let emulsion remover dry on the screen.
  • For heavy stains, apply haze remover to a dry screen when possible and allow 15 minutes of air dry time.
  • Turn the screen around during the final pressure wash to lift additional stain from the mesh.